The Economical solution to provide continuous facility protection and containment. Combining the most advanced technology with many years of production, Parker Systems, Inc. has produced a system featuring easy deployment, high visibility and abrasion resistance. The SpillMaster® SuperFlex Permanent Oil Spill Containment Boom is designed for deployment at permanent sites such as waterfront oil handling facilities, around ships in repair or storage. The SpillMaster® SuperFlex oil spill containment boom is more economical, lighter weight per foot, and has a higher buoyancy to weight ratio than other permanent booms.

SpillMaster® Superflex  Oil Spill Containment Boom In Use

 

SpillMaster SuperFlex Float  18 - 3/8"L x 6"W x 10 - 3/8" H

High Density fully enclosed rotationally molded polyethylene shell with a nominal 1/8-inch wall thickness, corners are approximately ¼-inch thick, providing great structural integrity that make it impact resistant and long lasting. International Safety Orange (Outrageous Orange) is our primary float color. This particular shade is renowned for its ability to remain colorfast. UV and Colorfast stabilizers added to ensure a long life span. The smaller length of the float allows a larger separation between floats, thus increasing the flexibility of the boom. Also, easier for small boats to handle and tow. We can manufacture floats in any color a customer requires. The hard-shell floats are injected with polyurethane closed cell flotation foam, that meets or exceeds US Coast Guard requirements for flotation foam, and are hermetically sealed with minimal air space to increase effectiveness and life span of the float. Hand holds for easy lifting All edges of the float are rounded to prevent the floats from gouging the barrier fabric during flexing of the boom, allowing the fabric to handle the stress of flexing with minimum wear. Bolt on for easy removal and replacement. PSI keeps floats readily available allowing replacement of floats as needed rather than having to replace entire sections of boom, which translates into less out-of-service time and improved cost efficiency. Float weight is 2.6 lb. Accepts hardware from ¼-inch to ½-inch. Buoyancy ratio 6 - 1 for maximum freeboard

 

Boom Options: Fabric - 175 oz. PVC, 80 oz. or 100 oz. Urethane coated polyester belting  (additional belting available upon request) Flotation - Molded polyethylene abrasion resistant and UV inhibited shell, filled with close-cell hydrocarbon and water resistant foam.  Ballast - galvanized steel weights Overall Height - 18, 24, or 36 inch (custom sizes also available) Standard Section Lengths - 50 or 100 foot (custom lengths also available) Connectors - Serrated Heavy Duty Aluminum ASTM Universal (slide), ASTM "Z"(quickconnect), Navy (male/female), and PVC Universal   Standard Features:  Boom complete with SS anchor points/handles. Connectors are serrated for better gripping of material and zinc anodes attached for corrosion resistance.