Parker Systems, Inc.
.
Home
About Us
New Products
Permanent Boom
Response Boom
Boom Accessories (Lights & Accessories)
Sorbents
OilSnare®
Turbidity Curtain / Silt Barriers
Spill Prevention
Secondary Containment
Land Containment Barriers
Emergency Leak Control
Skimmers, Pumps & Vacuums
GSA Contract Information
General Information
Links
Contact Us / Ordering Information
Site Map



BOOM ACCESSORIES

ACCESSORIES | LIGHTS | MOORING SYSTEM | MARINE LAMP

PSI offers a full line of accessories for your permanent boom applications and for repairs and maintenance of your existing boom systems. 

Accessories Include:

Bulkhead Risers
Cable Hangers
T-Connectors
Y-Connectors
Anchoring System
Anchor Points
Marker Buoy

Towing Bridle
H-Beam
Connector Adaptor
Anchors
Foamed Floats
Galvanized Steel or
    Lead Weights
Connectors
Boom Repair Kits
Magnetic Hull
    Connectors
Trailers
Tarps
Boom Reels
Boom Accessories

Boom Accessories
(click on image to enlarge)




BOOM LIGHTS


  Boom Light 
Standard Boom Marker Light
A-BML

Durable boom lights
Amber lens
Transistorized flashing circuit to turn on
    at dusk and off at dawn
66" overall height
Gross weight approximately 5 pounds
Floats with light one meter above water
Three volt system uses two standard
    D-type flashlight batteries
Fully stable in a variety of tide and sea conditions
Lead ballast
Meets U.S. Coast Guard recommendations for
     Boom Marker

ALSO AVAILABLE:

6-volt system
Red or white lenses
Steady-on circuit
Boom Light In Use
Boom Light In Use

 

NEW
Permanent Boom Marker Light

AC-PML/501AA

Are you tired of having to replace batteries every two days on the job?

This Marker Buoy Light is perfect for permanent Booming operations or installations that require lighted markers and needs little or no maintenance.

The Construction of this buoy is RUGGED from the word GO!

The pendulum is made of 6061-T6 3/4-inch Schedule 40 Aluminum Pipe with a Rubber coated polyethylene float designed for long lasting use in all weather conditions.
The light assembly has an amber LED with 1 200-hour reserve battery and a solar panel recharging system that will ensure long life
The Light has a 1-second duty cycle, 0.3 seconds on and 0.7 seconds off and sits 1-meter above the water line for good visibility.
The lights are warranted for three years, but will normally last for five years of continual service
The unit has a nylon lanyard with a stainless steel snap hook for ease of rigging to anchor point or boom
Lead Ballast secured in base of buoy pendulum
Extremely durable and cost effective.
Option -  The ON/OFF switch will reduce wear on the battery system when the unit is not in use.

  

PRODUCT PART NUMBERS AND DESCRIPTION

AC-BML  Standard Boom Marker Light - Amber, Flashing 7 lbs.
AC-PML/501AA Permanent Boom Marker Light without on/off switch 11 lbs
AC-PML/509AA Permanent Boom Marker with on/off switch 11 lbs.

 


Buoy Mooring System In Use

NEW
Buoy Mooring System

This 5x5 ft. buoy is constructed of a rotationally molded polyethylene shell with an internal galvanized skeletal system to provide rigidity and filled with US Coast Guard approved closed cell foam. The top of the buoy houses a maintenance free marine navigation amber lamp, with a photo sensor with a 200 hour reserve battery system.  Light lasts for up to five years of continual service. Buoy has numerous color options available with custom markings and graphics.

PRODUCT PART NUMBERS AND DESCRIPTION

AC-BUO/SYS5  Buoy Mooring System 500 lbs.

 

NEW-
Marine Lamp

The Marine lamp has a white LED with a 200-hour reserve battery and a solar panel recharging system that will endure long life.  The Light has a 4 second duty cycle, 0.1 seconds on and .03 seconds off.  The lights are warranted for 3 years, but will normally last for five to seven years.


Marine Lamp

PRODUCT PART NUMBERS AND DESCRIPTION

AC-501/W066F Marine Lamp  

 

Click HERE to see available Boom options. 

Top of page

 

© 2002 Parker Systems, Inc.
1-866-4PARKER
Designed & Hosted by:
Novo Solutions, Inc.