OIL
SPILL CONTAINMENT
Plug
N' Dike
Oil Spill Containment
Materials
Plug
N' Dike is a non-toxic material which, when mixed with water and
pressed into a puncture, forms an immediate seal to control
flammable and/or hazardous leaks or spills. It is a high
water-absorption polymer in  a
bentonite base. The dry polymer absorbs over 300 times its own
weight in water into a microstructure, swelling to produce a seal
against penetration of fuels and chemicals. Premixed Plug N' Dike
can be used for temporary plugging and patching of leaks in tanks or
drums. Dry Plug N' Dike can be used to dike surface spills. |
Plug N' Dike
Oil Spill Containment
Materials
|
|
| PART
NO. |
DESCRIPTION |
WEIGHT |
|
PD-48P |
Pail, Dry Granular 48 lb. |
48 lbs. |
|
PD-1PM |
Premix, 1¼# tub, 15/carton |
20 lbs. |
|
PD-8PM |
Premix, 11# tub, 3/carton |
34 lbs. |
|
PD-8PM/1 |
Premix, 11# tub, 1/carton |
12 lbs. |
Plug
N' Dike
Oil
Spill Containment Plug Rugs
| Plug
Rugs are a fabric reinforced sheet form of premixed Plug N' Dike
material. Just lay it over drains or storm sewer inlets. |
 |
|
Plug
Rugs |
| PART
NO. |
DESCRIPTION |
WEIGHT |
|
PD-24R |
Plug Rug, 24"x16", 4/carton |
56 lbs. |
|
PD-16R |
Plug Rug, 16"x16", 4/carton |
38 lbs. |
|
PD-8R |
Plug Rug, 8"x8", 12/carton |
30 lbs. |
PSI
Underwater Repair Epoxy
Fast repairs on wet, dry or underwater surfaces. Easy to use,
pre-measured alternative to welding. Plugs, cracks, gouges,
leaks and holes. For repair of fittings, pipe, pools, tanks,
gutters, plastic, fiberglass, wood, copper, steel, aluminum, ceramic
and concrete. Hardens in one hour. Unaffected by
chlorinated or salt water. |
 |
|
PRODUCT
PART NUMBERS AND DESCRIPTIONS |
| OR-REP/PTY |
4
ounce tube |
12/case |
Top of page
|
