Parker Systems, Inc.
.
Home
About Us
New Products
Permanent Boom
Response Boom
Boom Accessories (Lights & Accessories)
Sorbents
OilSnare®
Turbidity Curtain / Silt Barriers
Spill Prevention
Secondary Containment
Land Containment Barriers
Emergency Leak Control
Skimmers, Pumps & Vacuums
GSA Contract Information
General Information
Links
Contact Us / Ordering Information
Site Map


CONTAINMENT BARRIERS

Land Containment Barriers

SPILSTOPPER® | STREAM GUARD®



Spilstopper Draincover
IT'S BACK!  THE ORIGINAL engineered mat, designed to effectively seal off gravity flow of water and lighter-than-water liquids into surface-mounted drains, manholes, grates, storm drains, vents, and more. Inert to water, petroleum and most chemicals. Environmentally safe, reusable, flexible, durable, easily stored and cleans easily with soap and water between uses. The Spilstopper has been used widely for over 30 years and is the draincover of choice.  Standard sized are kept in stock but custom sizes are also available contact us for details.

 
STANDARD PART NO. SIZE WEIGHT
 SS-S18/18  SPILSTOPPER  DRAINCOVER  18" x 18"  10 lbs
 SS-S24/24  SPILSTOPPER  DRAINCOVER  24" x 24"  15 lbs
 SS-S36/36  SPILSTOPPER  DRAINCOVER  36" x 36"  31 lbs
 SS-S42/42  SPILSTOPPER  DRAINCOVER  42" x 42"  42 lbs
 SS-S48/48  SPILSTOPPER  DRAINCOVER  48" x 48"  50 lbs

       
NEW! SPILSTOPPER STORAGE CASE.  The storage case is constructed of rugged PVC pipe with end caps and carrying strap for ease of storage and handling. Available for standard draincovers as listed below but custom cases can also be provided.  

 
 PART NO. SIZE WEIGHT
 SS-S18/CS  18" x 18" STORAGE CASE  6 lbs
 SS-S24/CS  24" x 24" STORAGE CASE  8 lbs
 SS-S36/CS  36" x 36" STORAGE CASE  22 lbs
 SS-S42/CS  42" x 42" STORAGE CASE  25 lbs
 SS-S48/CS  48" x 48" STORAGE CASE  27 lbs




 
Stream Guard® Catch Basin Inserts
A StreamGuard® Catch Basin Filter consists of a specially designed, non-woven polypropylene felt filter bag which is suspended in the catch basin using a non-woven polypropylene felt fabric "boot". StreamGuard containment barrier units can be quickly installed in most catch basins by simply removing the catch basin grating, placing the filter in the basin opening, and replacing the grating. The weight of the grating holds the catch basin filter in place, even when full. There are three (3) models to choose from: Oil & Grease- Ideal for gas stations, vehicle maintenance areas, and fuel transfer stations. The right choice where small, frequent, hydrocarbon spills are a reality. Trash & Debris - Proven applications included stadiums, commercial waterfronts, and wood products facilities. Sediment - This low cost, low maintenance catch basin insert is ideal for surfaced construction sites and other areas prone to sediment loading. THESE CONTAINMENT BARRIER INSERTS FIT ANY SIZE CATCH BASIN UP TO 30" X 40". Curb-Style available also… available in sediment, oil & grease, and trash & debris models. Curb style inserts are universally fitting for catch basins up to 36" wide! Install curb-style inserts just like our standard units, then roll-up excess fabric against curb and tie off with provided clips. Stream Guard Oil-Grease Drawing
Stream Guard Sediment Drawing
Stream Guard Debris Drawing

Click on any drawing to enlarge

 

Stream Guard In Use

Stream Gurad Curb In Use

Stream Guard® In Use

Stream Guard® Curb In Use

Top of page

 

© 2002 Parker Systems, Inc.
1-866-4PARKER
Designed & Hosted by:
Novo Solutions, Inc