SpillMaster® Superflex 
Oil Spill Containment Boom
In Use

SpillMaster SuperFlex Float 
18 - 3/8"L x 6"W x 10 - 3/8" H

• Rotationally Molded polyethylene shell with a nominal 1/8-inch wall thickness, corners are approximately ¼-inch thick, providing great structural integrity that make it impact resistant and long lasting.

• International Safety Orange (Outrageous Orange) is our primary float color. This particular shade is renowned for its ability to remain colorfast. UV and Colorfast stabilizers added to ensure a long life span.

• The smaller length of the float allows a larger separation between floats, thus increasing the flexibility of the boom. Also, easier for small boats to handle and tow.

• We can manufacture floats in any color a customer requires.

• The hard-shell floats are injected with polyurethane closed cell flotation foam, that meets or exceeds US Coast Guard requirements for flotation foam, and are hermetically sealed with minimal air space to increase effectiveness and life span of the float.

• Hand holds for easy lifting

• All edges of the float are rounded to prevent the floats from gouging the barrier fabric during flexing of the boom, allowing the fabric to handle the stress of flexing with minimum wear.

• Bolt on for easy removal and replacement.

• PSI keeps floats readily available allowing replacement of floats as needed rather than having to replace entire sections of boom, which translates into less out-of-service time and improved cost efficiency.

• Float weight is 2.6 lb.

• Accepts hardware from ¼-inch to ½-inch.

• Buoyancy ratio 6 - 1 for maximum freeboard