Parker Systems, Inc.
.
Home
About Us
New Products
Permanent Boom
Response Boom
Boom Accessories (Lights & Accessories)
Sorbents
Oil Sorbents
Sorbent SOC's
Granular Sorbents
Industrial Sorbents
Spill Kits
OilSnare®
Turbidity Curtain / Silt Barriers
Spill Prevention
Secondary Containment
Land Containment Barriers
Emergency Leak Control
Skimmers, Pumps & Vacuums
GSA Contract Information
General Information
Links
Contact Us / Ordering Information
Site Map


Oil Absorbent

PSI Oil Sorbents-
Oil Absorbents

PADS | BOOMS | blankets | sweeps | particulate  pillows/bilge booms


When it's time to clean up or remove oil on land or water, PSI Sorbent oil absorbents are the best alternative. Convenient, lightweight and cost-effective, PSI Oil Sorbents absorb up to 25 times their own weight in petroleum products. A little does a lot! Additionally, PSI Oil Sorbents are equally effective in soaking up petroleum based solvents and paints, vegetable oils and other non-water soluble chemicals.

A single pound of PSI Oil Sorbents is equivalent to 25 pounds of clay, making deployment easy and saving time, money and resources. PSI oil absorbents will not absorb water, will float indefinitely, are wringable, dustless, unaffected by temperature, flame resistant and impervious to both rot and mildew. PSI Oil Sorbents are easily disposable because they incinerate to less than .02% ash.

Oil Sorbents Available
Pads
Booms
Pillows
Sweeps
Blankets
Particulate
SOC's
Oil Sorbent Pads

PSI Oil Sorbents

 

 Oil Pads
PSI Light Oil Sorbent Pads are recommended for use on minor on-water spills and for in-plant use as drip pads or wipes around machinery and equipment. These oil absorbents are always easily placed and retrieved.

   Oil Sorbent Pads

 

 

PART NO. SIZE QUANTITY WEIGHT DESCRIPTION
PS-P10 16"x20"  100/bale 19 lbs. Full, heavy weight
PS-P20 16"x20"  200/bale 19 lbs. Lightweight, double the coverage
PS-P13 16"x20"  100/bale 14 lbs. Medium weight, value
PS-P50 33"x39"  50/bale 38 lbs. Jumbo size, full heavy weight

 

Top of page

 

Oil Sorbent Boom  

PSI Oil Sorbent BoomPSI Light Oil Sorbent Boom is a rugged plastic net tube filled with sorbent material. The boom is flexible so it can be adapted to fit in waste water or holding ponds. Connectors at each end allow the linking together of several booms to provide a continuous chain of protection, permitting containment and absorption of a spill. This oil absorbent boom may be left deployed almost indefinitely.

PSI Oil Sorbent Boom

PART NO. SIZE QUANTITY   WEIGHT DESCRIPTION
 PS-SB8  8" x 10'  4/Bale  40 lbs. Strong, lint free, booms with no gaps
 PS-SB5  5" x 10'  4/Bale  20 lbs. Easy to handle even when saturated

Top of page




Blankets
.PSI Blankets
PSI Light Oil Sorbent Rolls provide a 144-ft. length of sorbent material ready to be cut or torn into the appropriate size for use around industrial equipment to protect floors from oil or chemical leakage.

PSI Oil Absorbent Blankets

PART NO. SIZE  QUANTITY  WEIGHT DESCRIPTION
 PS-BKT  38" x 144'   1/Bale  28 lbs. Full, medium weight, value roll
 PS-SPC152  19" x 144'  2/Bale   34 lbs. Full, heavy weight roll (2)
 PS-SPC150  38" x 144'   1/Bale  35 lbs. Full, heavy weight, value roll
 PS-BKT/19  19" x 144"  1/Bale  17 lbs. Full, heavy weight, roll (1)

 

Top of page




Sweeps
The PSI Light Oil Sorbent Sweep, made of high-strength fabric with a reinforcing strap added along one edge, this oil absorbent is designed to provide a sweeping action across the water's surface for the final clean-up of oil. PSI Light Oil Sweep

PSI Light 
Oil Absorbent Sweep

PSI Light Oil Sweep In Use

PSI Light Oil Sweep In Use

PART NO. SIZE  QUANTITY WEIGHT DESCRIPTION
PS-SWP  19" x 100'  1/Bale 15.lbs New durable blue cover stock, for extra strength

*Also available in white only.

Top of page

 

Particulate


PSI Light Oil Sorbent Particulate


PSI Light Oil Sorbent Particulate
consists of cotton-like dustless fibers. When spread over a spill, the oil absorbent particulate absorbs the oil quickly and is easily retrieved with a hand net or vacuum truck.

PSI Light Oil Sorbent
 
Oil Absorbent Particulate

PART NO. SIZE  WEIGHT  DESCRIPTION
 PS-PAR  27 lbs/bag  27 lbs.   Easy to deploy and collect, no dust
 

Top of page

 

Pillows And Bilge Booms
PSI Light Oil Sorbent PillowsPSI Light Oil Sorbent Pillows are sorbent material packed into open weave poly-mesh bags which allow passage of oil for more complete saturation. The oil absorbent  pillows are intended for use in sumps, drainage ditches, holding tanks and other confined sites.

PSI Light Oil Sorbent Oil Absorbent Pillows

PART NO.  SIZE QUANTITY  WEIGHT DESCRIPTION
PS-PIL  14" x 25"  10/bale   24 lbs  Lint free, Jumbo
PS-SPC518 5" x 18"   10/bale  8 lbs  Lint free, bilge boom
 for small spaces
PS-SPC818 8" x 18" 10/bale  18 lbs  Larger, lint free

  

Top of page

 

 
© 2002 Parker Systems, Inc.
1-866-4PARKER
Designed & Hosted by:
Novo Solutions, Inc.