CONTAINMENT SYSTEMS

Storage Containment Systems
Pallets & Workstations

STORAGE CONTAINMENT | PALLETS | WORKSTATIONS

Storage Containment Systems

Job Hut - Outdoor storage has never been so practical..or so affordable! It's big. It's safe. It's easy to use. And it's cost effective! An extra large storage area lets you store up to eight 55-gallon drums right on their pallets! Its low profile design allows for easy access. And it's forkliftable from all sides. Tough polyethylene construction means it won't rust or corrode, while UV inhibitors make it extra durable for outdoor use. A large 75-gallon maximum sump capacity eliminates the risk of spills or leaks, and structural foam grates remove for easy cleaning. Molded-in vents reduce fumes and condensation inside, while heavy-duty hinges and lock keep contents secure. The Job Hut containment system offers substantial savings when compared to similar metal or concrete storage buildings, while providing superior performance.

Regulations-  EPA 40 CFR 264.175 Part No. EN-4010-YE

      

Hazard Hut - The solution to your indoor storage problem is an outdoor containment system. When floor space is at a premium indoors, take your hazardous materials outdoors with the Hazard Hut. One-piece molded 100% polyethylene construction means there are no joints or seams to leak. Molded-in side vents reduce fumes, whle UV protection makes it a durable performer outside. Removable grates make it easy to clean and the 78-gallon maximum sump capacity ensures leak and spill containment. Security is no problem. The big double doors provide easy access for up to four 55-gallon drums while their double-wall construction and heavy-duty hinges and lock latches keep contents secure. Four-way forklift design makes the Hazard Hut easy to handle.

Regulations- EPA 40 CFR 264.175 Part No. EN-4000-YE

Poly-SafetyPack - Safe, secure two-drum storage containment system. This tough, indoor or outdoor performer can take everything the elements throw at it to protect two 55-gallon drums while containing leaks with a 135-gallon maximum sump capacity. Drum access and removal is easy with unique, gull-wing covers. Items inside are protected from the weather with unique slide-over lid design. Security locks are included to secure the covers and contents. 100% polyethylene has excellent resistance to chemicals as well as weather. And you don't need to open the lids to see if there's been a leak. Liquids are easily viewed through the translucent sidewalls. The Poly SafetyPack containment system is easily handled by forklift or pallet jack from two sides

Part No. EN-2038-YE Optional drain hole with plug.Part No.EN-2038-YE-D Regulations- EPA 40 CFR 264.175

Poly-SafetyPack Plus- Taller for secure pumping stations. The Poly-Safetypack Plus containment system provides the same results as the Poly-Safetypack, with one key advantage. The 51.25" inside height of the Poly-Safetypack Plus allows the lids to be closed with the pumps in place to create a versatile pumping station where the convenience of leaving the pumps installed is important. Capacity is also greater - 270 gallons.

Part No. EN-2077-YE Optional drain hole with plug. Part No. EN-2077-YE-D Regulations- EPA 40 CFR 264.175

2&4 Drum Hardcover SpillPallets - Small footprint makes Hardcover Spillpallet ideal for storage of two or four 55-gallon drums.  Roll-top design allows it to be used in limited space or next to building where swing-open doors would be  problem.  Lockable door! Used in conjunction with Poly-Spillpallet 2000 @ Slim-line 6000

Regulations- EPA 40 CFR 264.175   Part No.EN-4062-YE 2 Drum Hardcover Part No.EN-4064-YE 4 Drum Hardcover

Top of page

POLY-SPILLPALLET 2000 - Tough job! Holds two 55-gallon drums with a 2000 lb. UDL weight. Removable grates for easy cleaning.  Regulations - EPA 40 CFR 264.175, Dimensions - 53.5" l x 29"w x 17" h.

Part No. EN-5253-YE Part No. EN-5253-YED Optional drain

 

LOW-PROFILE IN-LINE POLY-SPILLPALLET 3000-Where no drum storage has gone before. Start storing them in-line near the wall, between columns, and all those spaces you thought were unusable-until now. Holds four 55-gallon drums, Holds up to 3,000 lbs. UDL weight, Non-skid, removable grates, Low 12" profile, 100% polyethylene construction, Raised edge on back & sides, 66-gallon sump capacity

Regulations EPA 40- CFR 264.175, Dimensions- 98" l x 25.5" w x 12" h   Part No.- EN-5102-YE, Optional drain hole w/plug Part No.- EN-5102-YE-D

POLY-SPILLPALLET 6000- Designed to hold the heavy load. Rated at 6000 lbs. UDL weight with an 83-gal sump capacity. Square footprint saves space yet easily holds four 55 gallon drums. Forkliftable from all sides. Bell Cover Option.

Regulations EPA 40 CFR 264.175 ,Dimensions 50" l x 50" w x 17" h,  Part No. EN-5001-YE, Optional drain hole w/plug Part No. EN-5001-YE-D

POLY-SLIM-LINE 6000-Slim is In. Features a low 12" profile and a UDL load bearing of 6000 lbs. Optional tarp for outdoor storage. 66-gallon sump capacity.

Regulations EPA 40 CFR 264.175 , Dimensions 54" l x 54" w x 12" h,  Part No. EN-5400-YE, Optional drain hole w/plug Part No. EN-5400-YE-D

 

POLY-PORTA-PALLET  Carry this lightweight, portable pallet anywhere.  Unique snap-up support strips creates a sturdy 8" sidewall when unit is opened.  Available in 5 standard sizes and optional grates available.
Part No. EN-5700-YE 48" x 48" Part No. EN-5710-YE 48" x 72" Part No. EN-5720-YE 48" x 96"	Part No. EN-5730-YE 96" x 96" Part No. EN-5740-YE 96" x 120"

 

POLY-LABTRAY - Brings spill protection to the laboratory bench. Poly-Labtray reduces spills and overflows of liquid and free flowing powder chemical during transfer of material in the laboratory. Its large surface holds four one-gallon bottles - up to 40 lbs. Static load weight - and the unit features up to 2.5 gallon sump capacity, which also makes it perfect for mixing small containers at production sites. There are no metal parts to rust or corrode. Low profile unit is only 3" high, small 25" x 21.5" footprint.

Part No. EN-5248-YE

Top of page

4, 6 & 8 Drum Workstations - Now you can whistle while you work. That's because there's no need to worry about incidental spills on your factory floor. Our workstations are the easiest to load with low profile design and optional ramp. One-piece construction optimizes space for increased durability, safety and efficiency. With ample sump capacity in each workstation, this secondary containment product is perfect for a dispensing station, or work center. Manufactured of 100% polyethylene, each workstation is designed for stand-alone use or to be combined with other workstations for a customized work area. Our rolled-edge design helps resist cracking and warpage.

Products above shown include 2,4,6, and 8 drum workstations and two multi-purpose work ramps with three sets of link-locks.

Top of page